Home page

How to Handle the Details of 45-Degree Corner Closure for Sintered Stone?

Are you worried about improper handling of the closure details of sintered stone? As long as the right method is used, it can be completely seamlessly spliced with excellent closure that is indistinguishable to the naked eye. So, how to handle the details of 45-degree corner closure for sintered stone?

(Method 1) For sintered stone corner closure, is this how you do it?

The difficulty of sintered stone lies in the details of closure. For corner closure, two 45-degree pieces are spliced into a 90-degree angle. First, fill the splicing part with sintered stone glue of the same color as the plate. The glue must be filled evenly and fully without unevenness. Wait until the sintered stone glue is completely cured before sanding.

(Method 2) Tutorial for 45-degree right-angle splicing of sintered stone:

First, clean the sintered stone to be spliced, bring the front sides together, and seal with adhesive tape.
Apply sintered stone glue evenly to the splicing area. When splicing, shake slightly to distribute the glue evenly.
Use a fixator to secure the corner and wait about 20 minutes for the glue to fully cure.
After curing, remove the excess tape, clean up the overflowing glue, and use a grinding disc to sand and polish the splicing area to the required standard.
Finally, clean it again. Have you learned it?

What to use for sanding sintered stone splicing joints?

Sandpaper with water can be used for sanding. Pay special attention to details and sand carefully to achieve a seamless 90-degree connection. The same operation applies to flat joints or other splicing joints.It is recommended to have the 45-degree corners of the sintered stone deeply processed and cut in the processing factory, and then transported to the site for sanding, which is more time-saving and labor-saving.

What glue is used for sintered stone? What is sintered stone glue?

Sintered stone special glue is a glue developed for seamless splicing of sintered stone. Its functions such as bonding strength, color stability, and high and low temperature resistance are all suitable for stable bonding of sintered stone, without problems such as falling off, cracking, yellowing, or blackening.Sintered stone special glue is specially used for seamless splicing such as 45-degree splicing/corner splicing/flat bonding, with good effects. However, sintered stone repair glue is only suitable for repair and cannot replace sintered stone special glue.Seamless splicing of sintered stone requires professional craftsmen to complete the splicing successfully in one step under correct guidance. Errors often occur such as uneven glue curing, black lines at the splicing joints, and air bubbles. Welcome to consult about related issues encountered with sintered stone glue.

This translation uses simple and straightforward language to ensure technical accuracy while being easy to understand. Let me know if you need further adjustments!

Summary:

Sintered stone special glue, designed for seamless splicing (45-degree/corner/flat), offers strong bonding, color stability, and resistance to temperature changes, preventing issues like falling off or yellowing. Repair glue cannot replace it. Professional guidance is crucial to avoid curing unevenness or black lines.